Vauhti LF166 Quick&Easy LF Glider Blue +5°...-6°C, 60ml

How to apply Speed Gel glide waxes:

Apply Speed Gel inside onto the dry ski base at room temperature. It is safe to wax with Vauhti Speed Gels inside. Special air ventilation or masks are not needed.

1. Place the skis bases upwards, shake the bottle a few seconds and press the sponge gently against the ski base (pressing opens the valve inside the applicator and the wax flows into the sponge). Spread a thin even layer of the gel onto the glide sections of your skis.

2. Let dry ca. 10-15 minutes.

3. Polish the bases either with the non-lint Vauhti Polishing Cloth or with a clean natural cork. For additional glide, brush well with a nylon brush. The skis are now ready to go!

If you are a classic skier, you still have to apply the grip wax. Check the glide surfaces every now and then and add Speed Gel as needed. One application will last 15-40 km presuming that the skis have been prepared well with Vauhti Base Preparation Paraffin (and blue glide wax) by using a waxing iron.

Note: Remember that the grip section (i.e. the middle section) of the classic skis must never be waxed with a glide wax